The Detection System for a Danger State of a Collision between Construction Equipment and Workers Using Fixed CCTV on Construction Sites.

According to data from the Ministry of Employment and Labor in Korea, a significant portion of fatal accidents on construction sites occur due to collisions between construction workers and equipment, with many of these collisions being attributed to worker negligence. This study introduces a method for accurately localizing construction equipment and workers on-site, delineating areas prone to collisions as 'a danger area of a collision', and defining collision risk states. Utilizing advanced deep learning models which specialize in object detection, video footage obtained from strategically placed closed-circuit television (CCTV) cameras across the construction site is analyzed. The positions of each detected object are determined using transformation or homography matrices representing the conversion relationship between a sufficiently flat reference plane and image coordinates. Additionally, 'a danger area of a collision' is proposed for evaluating equipment collision risk based on the moving equipment's speed, and the validity of this area is verified. Through this, the paper presents a system designed to preemptively identify potential collision risks, particularly when workers are located within the 'danger area of a collision', thereby mitigating accident risks on construction sites.

Tiered human health risk assessment of antibacterial quaternary ammonium compounds (QACs) in dishwashing detergents.

Quaternary ammonium compounds (QACs) are widely used in consumer products because of their unique antibacterial properties, and dishwashing detergents are a major source of exposure through oral, inhalation, and dermal routes. The three classes of QACs, including benzalkonium chloride (BAC), n-alkyldimethylethylbenzylammonium chloride (ADEBAC), and di-n-alkyldimethylammonium chloride (DDAC), in spray and non-spray types of dishwashing detergents were quantified by high-performance liquid chromatography-mass spectrometry. A tiered risk assessment approach was also considered. In the Tier 1 assessment, the mean and worst-case exposure were estimated to screen for rough exposure and risk levels. In the Tier 2 assessment, mean and upper-tail exposure levels were calculated based on the exposure parameters of Korean consumers using Monte Carlo simulation. QACs had a low frequency of detection of up to 20% in dishwashing detergents, and the contents of detected QACs varied depending on the individual samples. Based on the results of the Tier 1 assessment, BACs and DDACs posed potential health risks via inhalation and dermal routes. Tier 2 assessment suggested that the current level of oral and dermal exposure of Korean consumers to QACs in dishwashing detergents is unlikely to pose a health risk, even for upper-tail exposure groups. However, the present results suggest that spray-type DDACs may pose a health risk in the upper-tail inhalation exposure group, and further investigation is required to clarify this risk.

Ultra-fast PCR method for the distinguishing between Miichthys miiuy and Sciaenops ocellatus.

The mi-iuy croaker Miichthys miiuy has immense commercial value in the Republic of Korea. The red drum Sciaenops ocellatus is widely produced by aquaculture, although its price is approximately 25% that of M. miiuy. S. ocellatus has black spots on its tail, enabling it to be distinguished from M. miiuy based on appearance. However, identifying S. ocellatus after simple processing steps, such as skin removal and dicing, is difficult. Certain traders misrepresent and sell S. ocellatus as M. miiuy or cultured M. miiuy for illegal economical gain. Therefore, an accurate and rapid identification method is required to distinguish between M. miiuy and S. ocellatus in the field. Here, a method for rapid field identification was developed based on species-specific primers using a portable ultra-fast PCR instrument. The ultra-fast real-time PCR method can complete the entire analytical procedure, including DNA isolation, amplification, and detection, within 30 min, thus maintaining the accuracy of identifying M. miiuy and S. ocellatus products on site. Forty-nine commercial products were tested, and all samples were successfully identified. Thus, the developed method is rapid, efficient tool for ensuring consumer protection. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s10068-021-00954-4.

Shape memory alloy-driven undulatory locomotion of a soft biomimetic ray robot.

The objective of this study was to imitate undulatory motion, which is a commonly observed swimming mechanism of rays, using a soft morphing actuator. To achieve the undulatory motion, an artificial muscle built with shape memory alloy-based soft actuators was exploited to control the shape-changing behavior of a soft fin membrane. Artificial undulating fins were divided into two categories according to the method of generating the wave motion: single and multiple actuator-driven fins. For empirical research on the transformation and propulsion behavior of each fin type, the design and construction of bound propulsors were undertaken to mimic the structural and behavioral aspects of animals. To visualize the effect of undulatory motion on the swimming efficiency test of the fin beat frequency, a simplified soft undulating fin with a rectangular propulsor was constructed and tested. Additionally, dynamic modeling of the fin tip in wave-traveling was conducted for comparison and optimization. To optimize the thrust and propulsion efficiency of robot speed, the effects of the wave amplitude control and actuator sequence on the fin behavior were examined. An untethered robot was constructed according to the experimental results of the propulsors. Both exhibited exceptional swimming efficiency and maneuverability. The multiple actuator-driven ray robot exhibited a maximum swimming speed of 0.25 body lengths per second which is almost a similar swimming speed with previously reported robots. The developed robot achieved directional swimming (forward and backward) and turning (including rotation). Underwater exploration in an artificial environment was performed using the robot.

Development of a Method for Simultaneous Analysis of Allergenic Flavoring Agents in Cigarettes and Quantitative Risk Assessment for Consumer Safety.

Flavoring agents are added to cigarettes to improve taste. There are mostly permitted food additives, but some of them are restricted for use in food, cosmetics, and toys, since they can cause allergic reactions. Previous studies have investigated the levels of flavoring agents in tobacco but none has focused on their content in filter tips and capsules. Moreover, no studies have assessed the risk of adding allergenic flavoring agents in cigarettes. Here, we developed and validated a simultaneous analysis method for 25 allergenic flavoring agents and menthol with gas chromatography-tandem mass spectrometry to determine levels of flavoring agents in the tobacco, filter tips, and capsules of 54 commercial cigarettes in Korea. All cigarettes contained at least one allergenic flavoring agent regardless of the inclusion of flavoring capsules. Importantly, the filter tips and the capsules contained higher levels of flavoring agents than tobacco, highlighting the importance of the quantification of flavoring agents in these parts of cigarettes. Nevertheless, the risk assessment based on their levels in cigarettes suggested that their exposure was maintained at a safe level. However, the risk assessed from maximum menthol, linalool, and cinnamaldehyde exceeded one-tenth of derived no-effect levels, suggesting the need for further studies on their risk to human health.

Probabilistic risk assessment of preservatives in dishwashing detergents and wet wipes for Korean consumers.

Preservatives are essential additives in dishwashing detergents and wet wipes. Ensuring the safe use of preservatives in products is important for public health, as some preservatives are associated with health issues. In this study, the content of 12 preservatives in 105 dishwashing detergents and 105 wet wipes was determined, where these compounds are commonly found, among consumer products. A realistic exposure estimation was considered by using Korean consumer-specific exposure parameters for adults and babies. A probabilistic risk assessment was conducted by applying the Monte Carlo simulation method. Benzoic acid (41%) and cetylpyridinium chloride (30%) were the most commonly used preservatives in dishwashing detergents and wet wipes, respectively, although their content in different products (benzoic acid: 0.28-19.4 mg/g in dishwashing detergents; cetylpyridinium chloride: 0.003-0.64 mg/g in wet wipes) varied widely. The calculated median and upper-limit margin of safety (MOS) values related to systemic health effects and skin sensitization from exposure to preservatives largely exceeded the target MOS, which confirmed the safety of the products. Exposure to preservatives from wet wipes was several times higher in babies than in adults. Sensitivity analysis revealed that the amount of the product used, frequency of use, and weight fraction of the preservative were the major contributors to the exposure to preservatives from dishwashing detergents and wet wipes.

Development of a 68 Ga-labelled PET tracer for carbonic anhydrase IX-overexpressed tumors using the artificial sweetener saccharin.

In this study, we developed a saccharin (SAC)-based radiopharmaceutical (68 Ga-NOTA-SAC) and evaluated the possibility of its application as a PET tracer in the diagnosis of carbonic anhydrase IX (CA IX)-overexpressed tumors. We did a water-soluble tetrazolium assay and flow cytometry analysis to identify the cell viability decrease by SAC. The radiochemical purity and stability of 68 Ga- NOTA-SAC in human and mouse serum was greater than 98%. The small animal PET image-based radioactivity distribution of all organs decreased over time.68 Ga-NOTA-SAC presented the highest tumor-to-muscle ratio at 90 min post injection (p.i). The growth rates of tumor-to-muscle ratios of 68 Ga-NOTA-SAC were 88% at 60 min and 220% at 90 min, compared to 30 min p.i. The potential of 68 Ga-NOTA-SAC as a PET tracer is expected to contribute to the diagnostic research on CA IX-overexpressed tumors with the advantages of a relatively simple synthesis method.

Design and characterization of cereblon-mediated androgen receptor proteolysis-targeting chimeras.

Proteolysis-targeting chimera (PROTAC)-mediated protein degradation is a rapidly emerging therapeutic intervention that induces the degradation of targeted proteins. Herein, we report the design and biological evaluation of a series of androgen receptor (AR) PROTAC degraders for the treatment of metastatic castration-resistant prostate cancer. Predominantly, instead of thalidomide, we utilized the TD-106 scaffold, a novel cereblon (CRBN) binder that was identified in our previous study. Our results suggest that the linker position in the TD-106 CRBN binder is critical for the efficiency of AR degradation. The compounds attached to the 6-position of TD-106 promoted better degradation of AR than those at the 5- and 7-positions. Among the synthesized AR PROTACs, the representative degrader 33c (TD-802) effectively induced AR protein degradation, with a degradation concentration 50% of 12.5 nM and a maximum degradation of 93% in LNCaP prostate cancer cells. Additionally, most AR PROTAC degraders, including TD-802, displayed good liver microsomal stability and in vivo pharmacokinetic properties. Finally, we showed that TD-802 effectively inhibited tumor growth in an in vivo xenograft study.

Determination of toxic metal release from metallic kitchen utensils and their health risks.

The effect of simulants, repeated use, washing, and oiling on the release of toxic metals from metallic kitchen utensils was investigated. The release of As, Cd, Cr, Ni, and Pb from kitchen utensils composed of stainless steel, aluminum, copper alloy, and cast iron into food simulants was quantified using inductively coupled plasma-mass spectrometry. The results show that this release of toxic metals was highly dependent on pH. Generally, the release of toxic metals tended to decrease with repeated use, and the release of Cr and Ni from stainless steel samples was significantly higher in the first test, compared to the third test. The washing conditions affected the release of As and Cr, whose release levels were higher when washing only with water and with a steel wool pad, respectively. Furthermore, oiling cast iron cookware reduced the release of As, Cd, Cr, and Ni into acidic simulants by 66%, 83%, 71%, and 15%, respectively. The margin of exposure (MOE) was calculated for each toxic metal; the calculated MOE values indicated that it is improbable that the current level of exposure from metallic kitchen utensils would pose a health risk in Korea.

Survey of characteristics of exposure to mainstream cigarette smoke using discarded cigarette butts from Korean smokers.

Evaluating the characteristics of exposure to mainstream cigarette smoke is an essential field in tobacco research because of the large risk burden among smokers. Detailed evaluation of the complex factors pertaining to the exposure of smokers to mainstream cigarette smoke was attempted by analysis of discarded cigarette butts. A total of 5475 samples of discarded cigarette butts was collected to investigate the exposure characteristics in relation to Korean smokers. The basic physico-chemical characteristics of cigarettes, including the filter length, filter type, menthol addition, and nicotine and tar content, were determined and the manufacturer and cigarette size were identified. The tobacco-burned percentage (TBP)) and tar staining were used as physical markers, and actual human exposure to cigarette smoke was determined using the part filter method. Multiple linear regression analyses and generalized ordinal logistic regression analysis were conducted to identify the relationship between the socio-demographic factors and the physico-chemical characteristics of the cigarettes themselves and the exposure characteristics. Significant associations were observed between the TBP and age group, occupational group, manufacturer, tar staining, ISO tar content, and filter length. Increased odds of smoking with a heavier tar stain among Korean smokers were associated with blue collar workers vs. other workers, manufacturer B vs. other manufacturers, recess filter vs. other filter types, ISO tar content, and TBP. Finally, significant associations between the log-transformed human-smoked tar and nicotine yields and occupational group, the TBP, tar staining, and physico-chemical properties of cigarettes were found and were used to propose models for predicting the actual exposure to tar and nicotine. The proposed models account for 60-61% and 47-49% of the variance of human exposure to tar and nicotine, respectively. This analysis of discarded cigarette butts revealed that various factors, including socio-demographic factors such as age group and occupational group, as well as the physico-chemical properties of cigarette products such as the filter type and length, cigarette size, ISO tar and nicotine content, and mentholation, affect the characteristics of exposure of Korean smokers to mainstream cigarette smoke.

Potential for short-term migration of mineral oil hydrocarbons from coated and uncoated food contact paper and board into a fatty food simulant.

Mineral oil hydrocarbons (MOH) are widely used in the food industry for applications such as printing inks, additives, adhesives, and processing aids for food additives. Recently, the migration of MOH from food contact paper and board into foods has raised public health concerns. In this study, a total of 110 food contact paper and board samples, including baking and cooking paper (23), baking cups (28), food packaging bags (22), lunch boxes (8), party plates (26), and straws (3) were evaluated to quantify the content and short-term migration levels of MOH. The MOH were separated into mineral oil saturated hydrocarbons (MOSH)/polyolefin oligomeric saturated hydrocarbons (POSH) and mineral oil aromatic hydrocarbons (MOAH) via a validated on-line liquid chromatography-gas chromatography-flame ionisation detection (LC-GC-FID) technique. The coating materials of the sample products comprised polyethylene, polypropylene, polyethylene terephthalate, and silicone. The effects of the coating materials on the content and migration of MOH/POSH were evaluated. Quantitative analysis of the MOH in the samples showed that the MOSH/POSH and MOAH content varied widely, ranging from 16 to 5626 mg kg-1 for MOH, regardless of the coating materials. Short-term migration of MOSH/POSH was observed only in samples with polyolefinic coatings, such as polyethylene and polypropylene, in experiments conducted at 25 °C for 10 min, although the extent of MOAH migration for all samples was at the trace level. The migration of MOSH/POSH was detected within the range of 0.93 to 62.3 µg L-1 in 22 samples, and the migration of MOAH was detected within the range of 0.80 to 2.6 µg L-1 in only 4 samples. These results demonstrate that although the short-term migration potential of MOH is generally negligible, the migration of MOSH/POSH into wet fatty foods can be accelerated by polyolefinic coatings, even within a very short time.

An optimised method for the rapid analysis of condensed phosphates in fishery and processed marine food products using ion chromatography and microwave sample processing.

Condensed phosphates are deliberately added to the fishery and processed marine food products on purpose to increase the weight of products. However, excessive intake overwhelming bodily homoeostasis can result in phosphate toxicity such as mineral and bone disorders, associated with chronic kidney diseases, and cardiovascular events. Rapid analysis for condensed phosphates is required to detect the illegal adulteration of processed marine products. We optimised an analytical method using ion chromatography for the rapid and selective detection of condensed phosphates in various kinds of fishery and processed marine products. We compared the performance of three columns (IonPac AS11, AS11-HC, and AS16) for the detection of condensed phosphates with respect to time of analysis and sensitivity. The IonPac AS11 column exhibited the shortest retention time for the major condensed phosphates (pyro-, tri-, and trimetaphosphate), the highest sensitivity for trimetaphosphate, and good repeatability and precision. Microwave and boiling processing were examined as methods to prevent hydrolysis of condensed phosphates into orthophosphate, which is critical in distinguishing intentionally added condensed phosphates from naturally occurring orthophosphate. Microwave treatment was determined to be the more effective method to suppress hydrolysis of condensed phosphates to orthophosphate. Furthermore, microwave processing could be used for thawing the frozen samples, saving extra effort and time. We confirmed that the method exhibits good recovery (80% or more) and precision (%RSD < 10%) for samples with various matrices. With the method, 14 kinds of fishery and processed marine food products were successfully analysed for condensed phosphates. Especially, we identified that phosphate levels in the processed shrimp and dried shredded squid samples exceeded the maximum allowable levels specified in the CODEX standard. We believe that our method would be useful for the rapid analysis of condensed phosphates in various types of fishery and processed marine food products.

Cuvette-Type LSPR Sensor for Highly Sensitive Detection of Melamine in Infant Formulas.

The globalization of food distribution has made necessary to secure safe products to the general consumers through the rapid detection of harmful additives on the field. For this purpose, we developed a cuvette-type localized surface plasmon resonance (LSPR) sensor that can be easily used by consumers with conventional ultraviolet-visible light spectrophotometer for in-situ measurements. Gold nanoparticles were uniformly deposited on a transparent substrate via a self-assembly method to obtain a plasmonically active chip, and the chemical receptor p-nitroaniline (p-NA) was functionalized to stabilize the device sensitivity under external temperature and pH conditions. The fabricated chip was fixed onto a support and combined with a cuvette-type LSPR sensor. To evaluate the applicability of this sensor on the field, sensitivity and quantitative analysis experiments were conducted onto melamine as a model sample from harmful food additives. Under optimal reaction condition (2 mM p-NA for 20 min), we achieved an excellent detection limit (0.01 ppb) and a dynamic range allowing quantitative analysis over a wide concentration range (0.1-1000 ppb) from commercially available milk powder samples.

Highly Sensitive Solvent-free Silver Nanoparticle Strain Sensors with Tunable Sensitivity Created Using an Aerodynamically Focused Nanoparticle Printer.

We developed and presented highly sensitive solvent-free silver nanoparticle strain sensors fabricated using the aerodynamically focused nanoparticle (AFN) printer. The nanoparticles were printed in various conductive patterns. We explored how printer scan velocity affected pattern geometry and sensor sensitivity. The strain sensors were highly sensitive; the scan velocity afforded tunable sensitivity; and an analytical model predicted the behavior well under low-strain (<0.4%) conditions. We describe a prototype sensor that reliably measured composite beam tensile strain. We further enhanced the sensitivity by creating mechanical cracks, facilitating small dynamic signal measurements. The linear sensitivity of the sensor could be tuned from 18.60 to 290.62 by varying the scan velocity from 2 to 40 µm/s. The cracked sensor afforded the greatest sensitivity (1056) and captured small vibrations from a stringed instrument. We report highly sensitive and reliable measurements of dynamic behavior with simple tunability.

Risk assessment of toxicants on WHO TobReg priority list in mainstream cigarette smoke using human-smoked yields of Korean smokers.

Recently, the World Health Organization Study Group on Tobacco Product Regulation (WHO TobReg) announced a priority list of 38 toxicants among the more than 7000 chemicals found in cigarette smoke, building upon previous lists of toxicants in cigarette smoke. Here, we conducted a comprehensive study on the quantitative exposure and risk characterization of these priority toxicants in mainstream cigarette smoke listed by the WHO TobReg. The human-smoked toxicant yields estimated from spent cigarette butts of a total of 361 smokers using the part-filter method (PFM) were applied to current exposure and risk estimation for the first time. The PFM can estimate human-smoked yields of toxicants using smokers' maximum mouth-level exposure. The human-smoked yield of each toxicant was converted to systemic uptake by considering bioavailability. Risk indicators-including the incremental lifetime cancer risk (ILCR), cumulative ILCR, hazard quotient (HQ), hazard indices (HIs), and margin of exposure (MOE)-were estimated from the systemic uptake of toxicants combined with Korean exposure factors by gender and age group as well as for total smokers. It was demonstrated that cigarette smoking results in significant cancer and non-cancer health risks. A sensitivity analysis showed that the human-smoked toxicant yield is one of the most important contributors to risk level variations. Our risk estimation suggested that previous risk assessments might have ignored or underestimated the uncertainty of risk assessment. In conclusion, we assessed the risk level of the 38 toxicants on the priority list developed by the WHO TobReg and provided a Korean-specific priority list for the regulations on the emission of cigarette smoke.

Mixture risk assessment of selected mainstream cigarette smoke constituents generated from low-yield cigarettes in South Korean smokers.

A total of 38 hazardous constituents in mainstream cigarette smoke of low-yield cigarettes sold in Korea were selected and analyzed using established methods. Risk calculations were performed using risk algorithms employed in previous studies and Korean population-based exposure parameters. The median cumulative incremental lifetime cancer risk of male smokers could vary from 828 × 10-6 to 2510 × 10-6, and that of female smokers could range from 440 × 10-6 to 1300 × 10-6, depending on the smoking regimens. The median hazard index as the sum of hazard quotients of male smokers varied from 367 to 1,225, and that of female smokers varied from 289 to 970, depending on the smoking regimens. The sensitivity analysis for this risk assessment indicated that the constituent yields in mainstream cigarette smoke, average number of cigarettes smoked per day or year, and mouth-spill rate are the main risk factors. Statistical positive correlations between the average daily dose calculated by the exposure algorithm used in this study for individual smokers and biomarkers verified the reliability of this assessment. It could be concluded that inhalation of the constituents present in the mainstream of low-yield cigarettes has significant cancer and non-cancer health risks, although its effect on risk reduction is still unknown under the fixed machine-smoking conditions.

Quantitative analysis of menthol and identification of other flavoring ingredients in capsule cigarettes marketed in Korea.

Currently, capsule cigarettes have been introduced by tobacco industries and their sales have increased exponentially. However, the capsule flavoring ingredients and their safety are still unknown. Although the contents of menthol and other ingredients directly added to cigarettes have been determined extensively, no analogous study exists for menthol-containing cigarette capsules. Basic physical properties of capsules in all 31 different capsule cigarettes commercially available in Korea were investigated, and their menthol contents were determined in this study. Other ingredients in these capsules were also qualitatively analyzed; methyl octanoate, menthone and isopulegol as well as menthol were detected in all the capsules. There is considerable variability in basic physical properties and menthol contents of cigarette capsules depending on their brand styles. The menthol contents of capsules and whole cigarettes are similar or higher than those previously reported for conventional menthol cigarettes. This is the first report on the physical properties of capsules and the fact that a wide range of menthol contents in capsule cigarettes, regardless of flavor types, allows smokers to select menthol content to their liking.

Design and Fabrication of Soft Morphing Ray Propulsor: Undulator and Oscillator.

A soft morphing ray propulsor capable of generating an undulating motion in its pectoral fins was designed and fabricated. The propulsor used shape memory alloy for actuation, and the body was made with soft polymers. To determine the effects of undulation in the fins, two models that differed in terms of the presence of undulation were fabricated using different polymer materials. The experimental models were tested with a dynamometer to measure and compare thrust tendencies. Thrust measurements were conducted with various fin beat frequencies. Using the experimental data, the concept of an optimized standalone version of the ray robot was suggested and its prototype was fabricated. The fabricated robot was able to swim as fast as 0.26 body length per second and 38% more efficient than other smart material-based ray-like underwater robots.

A synthetic cannabinoid JWH-210 reduces lymphoid organ weights and T-cell activator levels in mice via CB2 receptors.

The problem of new psychoactive substances (NPS) is emerging globally. However, the immunotoxicity of synthetic cannabinoids is not evaluated extensively yet. The purpose of the present study was to investigate whether synthetic cannabinoids (JWH-210 and JWH-030) induce adverse effects on lymphoid organs, viability of splenocytes and thymocytes, and immune cell activator and cytokines in mice. JWH-210 (10 mg/kg, 3 days, i.p.) is more likely to have cytotoxicity and reduce lymphoid organ weight than JWH-030 of ICR mice in vivo. We also demonstrated that JWH-210 administration resulted in the decrease of expression levels of T-cell activator including Cd3e, Cd3g, Cd74p31, and Cd74p41, while JWH-030 increased Cd3g levels. In addition, JWH-210 reduced expression levels of cytokines, such as interleukin-3, interleukin-5, and interleukin-6. Furthermore, we demonstrated that a CB2 receptor antagonist, AM630 inhibited JWH-210-induced cytotoxicity, whereas a CB1 receptor antagonist, rimonabant did not in primary cultured splenocytes. These results suggest that JWH-210 has a cytotoxicity via CB2 receptor action and results in decrement of lymphoid organ weights, T-cell activator, and cytokine mRNA expression levels.